Cookie Img Back to top
   Call Me Free Offline Send SMS Send Inquiry
Home » Products » Condition Monitoring System » Bearing Condition Monitoring System

Bearing Condition Monitoring System

Bearing Condition Monitoring System
Product Code : CS 01
Product Description

The Bearing Condition Monitoring System would instantly recognize all type of bearing faults caused by any one or combination of any numbers out of the following four parameters :

  • Poor Lubrication and Rubbing,
  •  Race, Ball and Roller Defects,
  • Lubrication Contamination and
  • dB Level.


The Bearing Condition Monitoring System would characterize the detected signal in terms certain specified magnitude and dB Level shall be defined by the manufacturer.

  1. The specified magnitude shall be the proprietary parameter which performs a summation of all the microscopic clicks, crunches, whistles and groans associated with faults so as to instantly recognizing suspect machinery at a very early stage.
  2.  By dB Level shall be a measure of the overall signal level and is used to trend the rate of degradation of suspect machinery and to know how long the machine can run and indicate when the bearing should be replaced.
  3. The bearing condition monitoring tools would be able to recognize all types of bearing faults from minimum 1000 rpm to maximum 3000 rpm.
  4.  The bearing Manufacturer is required to furnish fault values of different bearings as mentioned above and dB Level measurement so as to compare with the measured values for taking necessary treatment of bearings of the machines.



MHC On-Site Instrument is for real time condition monitoring , Detect failure modes for shaft speeds > 0.25 rpm, Record & replay readings from pre-planned routes.


MHC-Memo kit incl. main unit, strong magnet sensor, leads, 4 NiMH batteries, re-charger, carry case and handbook.




Keypad- 5 keys,

Measurement Std- Distress, dB Level,

Carry Case- Included,

Display- 2 x 16 backlit LCD alphanumeric, Hold and Compare, Problem Alert, Coupling Alert,

Keypad- Sealed membrane,

Op. Temp- 0 - 50oC,

Battery type- 2 x PP3 / MN1604 (9 v or equivalent),

Weight- 800 g (approx),


Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.

494 B/A, East Sinthee Road, Dum Dum, Kolkata - 700030, West Bengal, India
Phone :+917259372794
Fax :91-33-25134145
Mr. Sanjoy Mazumder (Manager - Customer Support)
Mobile :+917259372794

Product Showcase
   Call Me Free Offline Send SMS Send Inquiry